Poultry house automation

Your whole shed,on your phone.

TapsuAI runs the fans, cooling, lights and feed for you — and sends the alert to your phone the moment anything goes wrong. Day or night, from wherever you are.

Works on any smartphone Keeps running if the internet drops
The TapsuAI app showing live shed temperature, humidity and gas readings
The controller

One box on the wall does the work.

It is fitted once, wired to your fans, cooling, lights and feed lines. From then on it holds the shed where you want it — and carries on doing that whether or not anyone is watching.

01

Set the targets once

Give it the temperature you want for each day of the cycle. It follows them as the birds grow.

02

It reacts faster than a person can

Fans and cooling step up the moment the house drifts, not when somebody notices.

03

Nothing is lost if the signal drops

The controller keeps running the shed on its own and catches the app up afterwards.

The TapsuAI controller mounted on a shed wall
Inside the shed

Everything in the shed, run from one controller.

!Cooling pad + pumpHot air inCooled air over the birdsFans step upwhen it driftsStale air outLights on a timerSensorsTemp · RH · NH₃ · H₂SControllerruns it all, even offlineSirenpower cut and returnReadings to the appAlert on your phoneHeater for chicks and cold nightsFeed lines12345678
1
Cooling pad and pump

Wets the pad so the air coming in is cooled. Runs on the same programme as the fans.

Logged every day, against the cycle day:Bird weightFeed givenMortalityWarm-up before placementCritical alarm when a limit is crossed
Why it pays

The losses you never see coming.

01

A cold night costs a batch

Birds huddle, stop feeding and smother. By morning the damage is done. TapsuAI wakes you while there is still time to act.

Young broiler chicks in a poultry house
02

Gas builds up silently

Ammonia burns the birds’ lungs long before anyone can smell a problem. The sensor notices it the hour it starts rising.

Sensor unit mounted inside a poultry house
03

Nobody can watch all night

A caretaker sleeps. A fan fails at two in the morning. The controller is awake for the whole cycle, every cycle.

Night view of a monitored poultry farm
On the ground

Running in real sheds.

36farms running it today

Every pin is a shed with our controller on the wall, sending readings to this same app. We fit it, wire it to your equipment and stay on the phone through the first cycle.

Fitted by usOne visit to mount the controller and wire it to the fans, cooling, lights and feed lines.
Sonipat, HaryanaKarnal, HaryanaHisar, HaryanaRewari, HaryanaLudhiana, PunjabBathinda, PunjabDehradun, UttarakhandMeerut, Uttar PradeshBareilly, Uttar PradeshLucknow, Uttar PradeshGorakhpur, Uttar PradeshJaipur, RajasthanAjmer, RajasthanAhmedabad, GujaratIndore, Madhya PradeshBhopal, Madhya PradeshRaipur, ChhattisgarhNagpur, MaharashtraNashik, MaharashtraPune, MaharashtraSangli, MaharashtraHyderabad, TelanganaWarangal, TelanganaVijayawada, Andhra PradeshRajahmundry, Andhra PradeshChittoor, Andhra PradeshBengaluru, KarnatakaBelagavi, KarnatakaNamakkal, Tamil NaduPalladam, Tamil NaduPalakkad, KeralaBhubaneswar, OdishaRanchi, JharkhandPatna, BiharBardhaman, West BengalGuwahati, Assam

Let the shed look after itself.

Tell us about your shed and we will talk through what it needs — the panel, the sensors and what it will cost you.

Where we are installed
Request
a call
Clear doubts

Questions farmers ask

Something else on your mind? Call us — a real person answers.

Talk to us

TapsuAI works even on low-signal mobile networks. Our smart gateway uses a heavy-duty antenna to ensure alerts always go out, even in rural areas.

All our sensors are industrial-grade and housed inside protective cages. If any sensor disconnects or stops sending data, you get an instant phone alert.

None at all. If you can read a standard mobile alert on your phone, you can easily use TapsuAI to manage your farm.

Yes, you can monitor up to 10 sheds on a single phone. The alerts will tell you exactly which shed has the issue.

Human caretakers sleep at night, and they cannot smell rising ammonia gases until it is already damaging the birds' lungs. TapsuAI monitors 24/7 without getting tired.

The siren in the shed sounds when the power goes and again when it comes back, so whoever is at the farm knows straight away.

We fit the controller and wire it to the equipment already in your shed — fans, cooling pad and pump, lights, heaters and feed lines — in one visit.

Yes. Temperature targets for each week, alarm limits and lighting hours can all be changed from the app. The controller confirms each change when it receives it, so you know it has been applied.

Yes. You can add accounts for your staff and choose which sheds each person can see. Remove an account and that person loses access straight away.

It depends on the size of your shed and the equipment it needs. Tell us about your shed and we will give you a clear price.